We intuitively feel that there is a market niche for tiny homes on wheels. Even though tiny homes on wheels are movable, they are different from recreational vehicles (RVs) in that tiny homes are not intended to travel down highways at high speeds for extended periods. If you build your tiny home on a trailer you can move it from property to property occasionally and even across the country once or twice if necessary. Once you locate it on the site where you choose to use your tiny home, you can either leave it on its trailer for easy moving in the future, or remove it from the trailer and set it on some form of foundation. The reason I switched to a stand up desk was, simply, to find a reprieve from pain.
Designing and building a tiny house on a trailer differs in several ways from building one on a foundation. First, of course, you will have to consider transport restrictions and load limitations. For most federal and state highways, the combination of trailer and tiny house height can be no more than 13 feet 6 inches tall. If you are moving your home just a short distance and are sure the area is clear of overhead wires and tree branches, you can exceed this limit somewhat. For example, we recently moved one tiny house that was nearly 15 feet tall, but we didn’t have to go under any bridges or electricity wires that were lower than that. The move was not legal in the strictest sense, but it was safe and well escorted and only a few miles on back roads, so we went ahead with it. Keep active at work or your home office with a adjustable standing desk that will help you to change working positions often.
You also have to keep the overall width of your portable tiny house within the restrictions established by your state. For example, in Virginia any load over 10 feet wide and up to the 16-foot maximum width has to have an over wide load permit and be accompanied by an escort vehicle in the front and another in the rear. The measurement is taken at the widest part of the house, generally the eaves. Length is not so critical for over-the-road transport, unless your destination is at the end of a twisted little path where a long vehicle will have trouble negotiating the curves. Many of the park-model tiny homes that we sell are 34 feet long with an attached 10-foot porch, making their overall length 44 feet. There are several modular home companies that can manufacture housing sections up to 66 feet long and transport them on specially built heavy-duty carriers. A standing desk is a desk conceived for writing, reading or drawing while standing up or while sitting on a high stool.
Another consideration, if you are building your house on a trailer, is to make sure your plumbing, electrical, and HVAC installation can accommodate the trailer framing. We built one tiny house on a trailer where the toilet had to be moved two inches so the drain could fit inside the metal frame of the trailer. You will also want to install some manner of waterproofing membrane on the underside so the floor insulation doesn’t get wet if you move the trailer on a rainy day. We use heavy-duty plastic and staple it securely to the underside of the floor joists as we install the floor on the trailer. Also, you will want to have shutters over the windows or some other form of protection to keep the window panes intact during transport. Unlike a car windshield, which is tempered glass, typical house windows are fragile and very likely to crack if hit by road gravel. A height-adjustable sit stand desk helps you cycle between sitting and standing throughout your workday.
We don’t use Sheetrock inside a tiny house that is to be moved, because we are always concerned about cracks in the Sheetrock joints. Instead, we use either solid pine logs or one-inch × six-inch tongue-and-groove eastern white pine boards, which are very attractive and much more in keeping with the charm and style of tiny cottages that we build. The overall weight of the house is also a consideration when designing and building one for portability. If you are using a lightweight utility trailer, you are limited to about 7,000 pounds of house weight, which is easy enough to achieve if you use light framing materials and finish materials and if your house size isn’t much larger than, say, 10 feet × 20 feet. Stay away from extra- thick walls, heavy dimensional roof shingles, and drywall, all of which are heavy and can be replaced by much lighter materials such as 2 × 2 walls, metal roofing panels, and pine interior walls. Improved health? Collaboration? Productivity? Get all of these benefits and more with a electric standing desk from your favourite online retailer.
If you are planning to build the house and then move it only one time, you can hire someone with a heavy-duty trailer and truck to move the house. You can lift the house onto the trailer, and then lift it onto your new foundation with a hired crane. If you have built your tiny house on a trailer but don’t want to hire a crane, haul the tiny house to your destination, then use jacks to lift the house clear of the trailer. Remove the trailer, then install the permanent piers and lower the house onto them.